Хозяйкам на заметку

С выходом VirtualCenter 2.5.0-U3 обновился список HA advanced options.
Спасибо дяденьке Duncan Epping, который опубликовал их полный список:

das.failuredetectiontime - Amount of milliseconds, timeout time for isolation response action(with a default of 15000 milliseconds).
das.isolationaddress[x] - IP adres the ESX hosts uses for it’s heartbeat, where [x] = 1‐10. It will use the default gateway by default.
das.usedefaultisolationaddress - Value can be true or false and needs to be set in case the default gateway, which is the default isolation address shouldn’t be used for this purpose.
das.poweroffonisolation - Values are False or True, this is for setting the isolation response. Default a VM will be powered off.
das.vmMemoryMinMB - Higher values will reserve more space for failovers.
das.vmCpuMinMHz - Higher values will reserve more space for failovers.
das.defaultfailoverhost - Value is a hostname, this host will be the primary failover host.
das.failuredetectioninterval - Changes the heartbeat interval among HA hosts. By default, this occurs every second (1000 milliseconds).
das.allowVmotionNetworks - Allows a NIC that is used for VMotion networks to be
considered for VMware HA usage. This permits a host to have only one NIC configured for management and VMotion combined.
das.allowNetwork[x] - Enables the use of port group names to control the networks used for VMware HA, where [x] = 0 - ?. You can set the value to be ʺService Console 2ʺ or ʺManagement Networkʺ to use (only) the networks associated with those port group names in the networking configuration.
das.isolationShutdownTimeout - Shutdown time out for the isolation response “Shutdown VM”, default is 300 seconds. In other words, if a VM isn’t shutdown clean when isolation response occured it’s being powered off after 300 seconds.
das.bypassNetCompatCheck - Disable the “compatible network” check for HA that was introduced with Update 2. Default value is “no”, setting it to “yes” disables the check.